16 November 2010

panels for exhibition

As mentioned earlier I wanted to make wood panels to add space to the Denman exhibition over Christmas.

I may in fact have a screen at marketable quality. From paulownia, which I planted in 1993.

I plan three panels for the screen, in zig-zag, at this stage lesser panels (170cm) on either side, a large 2 metre panel in the middle.

The centre panel's sides have been cut to a straight edge. The side panels retain natural tree trunk edge. Hinges will be fitted to the sides of the centre panel and a couple of inches in from an edge of each of the side panels. Foldable, portable, like this   \/\     but right angles to stand in the room.

While sanding the major central panel I found there were three knots in the wood, immediately suggestive of a form (the third was going to be a navel but an arm got in the way so it appears to be a stigmata). Click on images to enlarge, 'back' to return.

So here is the roughed out panel centre panel and the yet to be thought about properly side panels. The leg form of the side panels was determined by stress cracks in the slabs. As art works will hang on these side panels they will not be ornate, may simply be polished as is.


No comments: